The Middle East client purchased scrap copper wire chopper machine function normally and operate well in his factory.
BS-600 scrap copper wire chopper machine is used for processing automobile wires, communication cables and other types of miscellaneous wires and cables.
This scrap copper wire chopper machine can process the scrap wire 300-400 KG per hour, the power is 45KW. Separator rate is 99.9%.
The consumption is about 36KW.H. Middle size , good performance,easy operated, very suitable for home using with low noise.
The video of scrap copper wire chopper machine BS-600 working in the factory is as follow:
scrap copper wire chopper machine Working Process:
1.put scrap wires into feeding hole and shreddered by wire separator crusher
2.raw material scrap wire was crushed and were transported by convey into air separation bed.
3.copper was transported into wire separtor inner sieves and separate copper from plastic granules
4.Copper granules and plastic granules comes out from the machine through different outlets, and dust is collected by Dust Collector.(Copper wires less than 20mm in diameter are suitable, single conductor diameter of 0.2-0.3mm is best.)
if you have any question, you can
whatsapp: 008613772508206 or email: bsgh10@bsghequipment.com
