1
/
Copper Wire Shredder Machine
2:99% recycling rate.
3:Higher capacity 200KG/H with small size.
4:Low noise without pollution.
5:No matter whether copper wire or aluminum wire all can be recycled.
6:Overseas technical support available and all day long 24hours service, call me: 008613772508206.
Product Details
Reliable Copper Wire Shredder Machine Manufacturer
Copper wire shredder machine from BSGH factory is a kind of copper recycling machine for separating copper from PVC. BSGH D series of copper shredders are the most affordable, cost-effective machines, and this model is suitable for everyone.
Description: Copper wire granulator machine is specializing in auto-wire, communicate cable, and other mixed copper wire/cable. It has a granulator、separator、dust collector and a PLC control panel, can recycle copper and plastic, have high economic benefits, without environmental pollution.
BSGH manufacturers provide professional cable shredders in China and all over the world, and get all good comments from our customers.
BS-D20 copper wire shredder is a mature copper recycling machine that mainly recycled car wires, communication cables, miscellaneous lines, copper wires, and aluminum wires also, this machine can crush and shred all kinds of scrap wires, after via vibration and air separation to reach the separate effect.
This device forms an integrative structure and stable working, saving space.
1. The whole system is controlled by the Control Panel.
2. The bottom airflow is controlled by the Airlock.
3. Stable operation.
4. Minimum copper recycling rate can reach 99%.
5.No dust, no secondary pollution.
What Industries Our Customers Come From:
• Serving a diversity of market players
- Scrap processing industry
• A large number of local family-run scrap yards
• International scrap recyclers
- Automotive industry: big car recycling manufacturers
- Steel mills and foundries
What's the difference between BSGH manufacturers and other family factories?
Surely BSGH is formal and standard leading manufacturer factory in China, no matter quality control or workmanship or the technology, these are the most difference, many other companies imitate our machine but only surface looks like, inner technology not, so after you use our machine and others to compare, then you know the big difference between us.
Technical Data:
| Processing diameter | 0.2-20mm |
| Machine Size | 260*160*200cm |
| Machine Weight | 2000kg |
| Gross Weight | 2110kg |
| Machine Voltage | 380v/220v or customized |
| Processing Capacity | 200kg/h |
| Motor Power | 28KW |
Working Process:
Step1: Materials will be crushed to about 3mm by crusher;
Step2: Copper and plastic particles will be obtained by high-precision air separation;
Step3: Unseparated plastic particles will be separated by shaking again;
( This step is to ensure the recycling of copper! )
Attention: The copper shredder machine is fully controlled by PLC, with large output, low power consumption, has high copper recycling rate, and easy operation!
Machine Features:
1. Easy to operate: Machine is controlled automatically, and only needs 1-2 workers.
2. High purity: Copper separating rate could reach 99.99%.
3. Environmental-friendly: No dust during operation and no need for water.
4. High quality: Made up of superior steel board, long lifetime.
5. Multi-function: Could process all kinds of cable/wires.
Correct Operation:
The choice of a Cable Shredder depends on the material properties of the types of copper wires and cables. Correct choice can not only improve the working efficiency but also extend the service life of machine. Cutting blades are made with Wire Cutting Technique, blades are replaceable for each other. We have different requirements for blades for different types of copper wires.
1). Air-fine Wires, Multi-strands (See Photo)
When dealing with Air-fine Wires and Multi-strands, fixed blades and rotating blades must be very sharp so that copper wires can be cut and copper granules will be very clean and pure.
2). Single-strand and Single-core Wires (See Below Photos):
When dealing with Single-strand and Single-core Wires, rotating blades shall be a little blunt and fixed blades must be sharp. In this case, spacing between rotating blades and fixed blades is just able to hold wires but does not touch cores. Wires are crushed but there will be little copper granules with plastics outside.
(Note: if blades are not adjusted by requirements, it may cause too many copper-clad granules and the separation is not clean, etc.)
Notable Tip:
1：All of machine bolts need to be tightly fastened.
2：Distance between fixed blades and rotating blades more smaller more better.
3：Gap between rotated blades and the crusher sieve, the smaller the better.
4：If blades are dull, grind in time.
5：Crusher shaft adds the Heat resistant butter one time per month.
6：If crusher belt is loosened, fastened in time.
Machine Packing:
 strictly test after finished |  inner packaged with plastic film |  load and transport to warehouse |
Final Product:
 copper granular |  plastic granular |
Get wire shredder wholesale price from BSGH EQUIPMENT now:
1: Overseas technical support available.
2: All day long 24-hour service, call me: 008613772508206.
Hot Tags: Copper Wire Shredder Machine, manufacturers, suppliers, factory, wholesale, buy, customized, cheap, distributor, dealer, low price, for sale, best quality
