Have you encountered any difficulties in process of using copper wire granulator machine?
Do you know how to change crusher sieves in copper wire granulator machine?
Today let me show you.
How to change your crusher sieves in a copper granulation machine?
|
|
As shown in above video, you need to do:
◆ Open crusher case take out the crusher sieve;
◆ Original crusher sieve as standard, other sieves will adjust according standard sieve;(Notice: crusher sieve top middle can not do any action, only side can adjust)
◆ Install crusher sieve, if sieve can not stuck to the blades base, it is to say the sieve is a little longer, then use an angle grinder to grind it and install again;
◆ Then fasten the bolts, the joint part have no gap;
◆ After finish installing crusher sieve, the you can see how it stuck under blades base.
Why need to change sieves in copper separator machine?
The sieve is the main guarantee for filtering particulate matter and making the copper and plastic processing of the copper recycling machine more pure and high-quality. It is precisely because of this that the sieve will be extremely clogged after long-term use and work. Therefore, when using the copper wire recycling machine, we need to clean and replace them regularly to ensure the best performance of the copper cable recycling machine.
Of course, in order to make your wire separator have better performance, you need to regularly repair and maintain your machine:
1: Cutter and blades will become blunt after a period of production, which will affect the crushing effect and separating effect, so it needs to be ground every once in a while. When grinding blades, you should choose mechanical grinding, and you must not grind it at will. The blades will become narrower after repeated grinding, and when the gap between the rotating blade and the fixed blade of the casing cannot meet the crushing requirements, the old blades need to be replaced. When grinding or changing the tool, the power should be turned off before operation. The gap between the moving knife and the fixed knife should be adjusted every time after grinding or changing the knife.
2: Regularly clean and replace the sieves to ensure the separation effect of copper and plastic from cable wires.
Precautions:
1: Machine should be placed stably before installation and debugging
2: Raw materials should be classified and broken during the production of the copper cable separator machine, and copper wire and aluminum wire should not be mixed together.
3: Regular maintenance and maintenance of your machine.
Welcome to know more about copper recycling machines from BSGH manufacturers. We have been waiting for you, support 24 hours online services, hope to call me:008613772508206 anytime.
If you have any questions about scrap copper recycling machines, welcome to know more:
coppergranulator@bsghrecycling.com
